Arduino

Technologies.Arduino History

Hide minor edits - Show changes to output

September 27, 2011, at 07:24 PM by 136.159.48.155 -
Changed lines 72-73 from:
>><<
to:
* [[http://developer.android.com/guide/topics/usb/adk.html | Arduino on Android]]
>><<

(:if false:)
Editors:
Matthew Dunlap
Richard Fung
(:endif:)
December 04, 2010, at 01:06 PM by 136.159.18.176 -
Deleted line 10:
December 01, 2010, at 11:17 AM by 136.159.18.20 -
Changed lines 64-65 from:
* [[Attach:arduino-example-fungr.pdf | Arduino Servo Motor Speed Control]]
* [[Attach:KnockLight.zip | Turning a LED light by using a vibration sensor (Miaosen Wang)]]
to:
* [[Attach:arduino-example-fungr.pdf | Arduino Servo Motor Speed Control]] (Richard Fung)
* [[Attach:KnockLight.zip | Turning a LED light by using a vibration sensor
]] (Miaosen Wang)
November 22, 2010, at 01:00 PM by 136.159.7.192 -
Changed line 65 from:
* [[Attach:KnockLight.zip | Turning a LED light by using a vibration sensor]]
to:
* [[Attach:KnockLight.zip | Turning a LED light by using a vibration sensor (Miaosen Wang)]]
November 10, 2010, at 01:45 PM by 136.159.7.192 -
Changed line 65 from:
to:
* [[Attach:KnockLight.zip | Turning a LED light by using a vibration sensor]]
November 08, 2010, at 10:18 AM by 136.159.18.20 -
Changed lines 63-65 from:
[[Attach:Matthew Dunlap - Arduino - I2C Digital Pot Control.zip | Arduino Digital Potentiometer Control]]
[[Attach:arduino-example-fungr.pdf | Arduino Servo Motor Speed Control]]
to:
* [[Attach:Matthew Dunlap - Arduino - I2C Digital Pot Control.zip | Arduino Digital Potentiometer Control]]
* [[Attach:arduino-example-fungr.pdf | Arduino Servo Motor Speed Control]]
November 08, 2010, at 10:18 AM by 136.159.18.20 -
Changed lines 64-65 from:
to:
[[Attach:arduino-example-fungr.pdf | Arduino Servo Motor Speed Control]]
November 05, 2010, at 12:13 PM by 136.159.18.247 -
Changed lines 63-64 from:
[[Attach:Matthew Dunlap - Arduino - I2C Digital Pot Control.zip | Sine Wave Controller using ChucK]]
to:
[[Attach:Matthew Dunlap - Arduino - I2C Digital Pot Control.zip | Arduino Digital Potentiometer Control]]
November 04, 2010, at 05:37 PM by 136.159.18.247 -
Changed lines 63-129 from:
* Using a slider and servo motor
[@
// Richard Fung
//
// use a Duemilanove board
// attach a servo motor to analog in 0, 5 V, and ground
// attach a slider bar to analog in 5, 5 V, and ground

#include <Servo.h>

Servo servo1;
int pos;
boolean isForward;
int spd;
boolean blinker;

void setup()
{
pinMode(0,OUTPUT);
pinMode(13,OUTPUT);
servo1.attach(14); // analog pin 0

pos = 0;
isForward = true;

spd = 15;
blinker = false;
}

void loop()
{
blinker = !blinker;
digitalWrite(13, blinker ? 1 : 0);

if (isForward)
{
pos = pos + 1;
if (pos > 179)
{
isForward = false;
}
}
else
{
pos = pos - 1;
if (pos < 0)
{
isForward = true;
}
}

if (pos > 179)
pos = 179;

if (pos < 0)
pos = 0;

servo1.write(pos);

int v = analogRead(5);
spd = map(v,0,1023,15,45);

delay(spd);

}
@]
to:
[[Attach:Matthew Dunlap - Arduino - I2C Digital Pot Control.zip | Sine Wave Controller using ChucK]]
November 01, 2010, at 10:28 PM by 136.159.18.20 -
Changed lines 63-64 from:
*
to:
* Using a slider and servo motor
[@
// Richard Fung
//
// use a Duemilanove board
// attach a servo motor to analog in 0, 5 V, and ground
// attach a slider bar to analog in 5, 5 V, and ground

#include <Servo.h>

Servo servo1;
int pos;
boolean isForward;
int spd;
boolean blinker;

void setup()
{
pinMode(0,OUTPUT);
pinMode(13,OUTPUT);
servo1.attach(14); // analog pin 0

pos = 0;
isForward = true;

spd = 15;
blinker = false;
}

void loop()
{
blinker = !blinker;
digitalWrite(13, blinker ? 1 : 0);

if (isForward)
{
pos = pos + 1;
if (pos > 179)
{
isForward = false;
}
}
else
{
pos = pos - 1;
if (pos < 0)
{
isForward = true;
}
}

if (pos > 179)
pos = 179;

if (pos < 0)
pos = 0;

servo1.write(pos);

int v = analogRead(5);
spd = map(v,0,1023,15,45);

delay(spd);

}
@]
November 01, 2010, at 01:21 PM by 136.159.18.247 -
Changed line 60 from:
>>blackbox<<
to:
>>redbox<<
Changed line 68 from:
>>redbox<<
to:
>>greybox<<
November 01, 2010, at 01:21 PM by 136.159.18.247 -
Changed line 68 from:
>>greybox<<
to:
>>redbox<<
November 01, 2010, at 01:21 PM by 136.159.18.247 -
Changed line 60 from:
>>redbox<<
to:
>>blackbox<<
November 01, 2010, at 01:16 PM by 136.159.18.247 -
Deleted line 8:
November 01, 2010, at 01:16 PM by 136.159.18.247 -
Changed line 9 from:
%define=redbox box bgcolor=#FFE4E1 border='1px solid #EE5C42'%
to:
November 01, 2010, at 01:14 PM by 136.159.18.247 -
Added line 9:
%define=redbox box bgcolor=#FFE4E1 border='1px solid #EE5C42'%
Added line 22:
* [[#classHelloWorld | Class Hello Worlds]]
Added lines 60-67:
[[#classHelloWorld]]
>>redbox<<
!!! Class Hello Worlds

*

>><<
October 14, 2010, at 04:50 PM by 136.159.7.119 -
Changed line 12 from:
%rfloat% Attach:projectimage.jpg
to:
%rfloat% Attach:arduinoimage.jpg
October 14, 2010, at 04:42 PM by 136.159.7.119 -
Deleted line 48:
Deleted line 49:
October 14, 2010, at 04:42 PM by 136.159.7.119 -
Added line 47:
October 14, 2010, at 04:42 PM by 136.159.7.119 -
Added line 48:
October 14, 2010, at 04:41 PM by 136.159.7.119 -
Changed line 47 from:
* [[Technologies.Arduino.I2C|Arduino I2C Rundown]] (to be done)
to:
* [[Technologies.ArduinoI2C|Arduino I2C Rundown]] (to be done)
Added line 49:
October 14, 2010, at 04:41 PM by 136.159.7.119 -
Changed lines 13-15 from:
Abstract text about the project.
to:
Introduction to Arduino
Changed line 47 from:
to:
* [[Technologies.Arduino.I2C|Arduino I2C Rundown]] (to be done)
October 14, 2010, at 04:37 PM by 136.159.7.119 -
Changed lines 38-39 from:
* (Under Construction)
to:
* [[http://grouplab.cpsc.ucalgary.ca/cookbook/uploads/Technologies/arduino.ppt|Arduino Presentation File]]
* [[http://www.elexp.com/t_resist.htm|Resistor Reading Guide]]
Changed lines 48-49 from:
* (Under Construction)
to:
* [[http://www.arduino.cc/en/Tutorial/HomePage|Arduino Examples Page]]
* [[http://arduino.cc/en/Tutorial/Blink|Blink Example]]
* [[http://www.arduino.cc/en/Tutorial/BlinkWithoutDelay|Blink w/o delay(
)]]
* [[http://www.arduino.cc/en/Tutorial/AnalogInput|Potentiometer/Sensor Blink Example]]
* [[http://arduino.cc/en/Tutorial/Button|Button Example]]
Changed lines 61-62 from:
* (Under Construction)
to:
* [[http://pages.cpsc.ucalgary.ca/~madunlap/index.php?n=Site.ArduinoCircuitBending|Circuitbending with Arduino]] (incomplete)
October 14, 2010, at 04:20 PM by 136.159.7.119 -
Changed lines 30-31 from:
* (Under Construction)
to:
* [[http://www.arduino.cc/en/Main/Software|Arduino Latest Version]]
Added lines 1-57:
%define=box padding-left=1em padding-right=1em margin='3px 3px 0'%
%define=yellowbox box bgcolor=#fdfaea border='1px solid #ffad80'%
%define=redbox box bgcolor=#fff3f3 border='1px solid #ffc9c9'%
%define=bluebox box bgcolor=#f4fbff border='1px solid #a1cae6'%
%define=skybox box bgcolor=#f8fcff border='1px solid #aaaaaa'%
%define=greybox box bgcolor=#fbfbfb border='1px solid #aaaaaa'%
%define=greenbox box bgcolor=#e6f3e5 border='1px solid #8fd586'%
%define=whitebox box bgcolor=#ffffff border='1px solid #999999'%
\\


%rfloat% Attach:projectimage.jpg
Abstract text about the project.


!!! Contents

* [[#download | Download and Installation]]
* [[#recipes | Recipes, How-To's]]
* [[#tutorials | Tutorials and Examples]]
* [[#links | Links]]
\\
\\


[[#download]]
>>greenbox<<
!!! Download and Installation

* (Under Construction)

>><<

[[#recipes]]
>>yellowbox<<
!!! Recipes and How-To's

* (Under Construction)

>><<


[[#tutorials]]
>>bluebox<<
!!! Tutorials and Examples

* (Under Construction)

>><<

[[#links]]
>>greybox<<
!!! Links

* (Under Construction)

>><<